First time users:
1. Remove filter during cleaning process.
2. Use existing water to deep-cleanse your spa for 1 to 24 hours using approximately 4 oz.
of EcoOne PIPE cleanser.
3. Drain spa and rinse surfaces with fresh water. Clean spa shell and cover. Refill and
drain spa 'well' (center of spa) 2 to 3 times to assure removal of all contaminants from
plumbing.
4. Refill spa and heat to operating temperature. Adjust alkalinity, pH, calcium hardness
as needed. pH Range: 7.2 - 8.2 Alkalinity: 80 - 120 Hardness: 200+
5. Add minimum recommended amount of sanitizer or one dissolving packet of ONEShock™
(where available) per 250 gallons
BIGUANIDE NOTE: When switching from a biguanide product, drain and refill spa before cleansing
and replace cartridge filter.
NEW SPAS: New spas should be filled and cleansed before starting EcoOne® as manufacturer
'wet testing' may cause buildup of mold, or other contaminants.
NOTE: NEVER use household cleaners to clean your spa. They can damage the shell and cause
foaming.
VERY HARD or WELL WATER: Many initial water quality issues can be solved by filling your spa
using the EcoOne® HOSE Pre-Filter. If your water is excessively hard, you may need to use a
stain and scale control product.
SPA monthly Instructions:
1. Fill spa and heat to normal operating temperature.
2. Add sanitizer. Balance alkalinity, then pH if needed.
3. With jets and blowers running, add one bottle of EcoOne® SPA Monthly directly to spa water.
Simple System
Monthly: Add one bottle of EcoOne® SPA monthly
Weekly: Clean filter with EcoOne® FILTER cleanser
Daily: (or as needed) Sanitize with ONEshock or
any sanitizer of your choice.
Maintenance:
AS NEEDED: Maintain lowest recommended sanitizer level (.5 to 3 ppm generally - follow
sanitizer instructions)
WEEKLY: Clean Cartridge Filter with EcoOne FILTER cleanser
WEEKLY (or as needed): Shock spa with ONEShock™, dichlor, or non-chlorine shock.
MONTHLY: Add EcoOne® SPA Monthly
EVERY 3 MONTHS (or as needed): Cleanse spa with EcoOne PIPE cleanser, drain and refill.
DAILY: ENJOYl
Recommended for users with skin and chemical sensitivities.
No ingredients hazardous to humans, animals or plants per CFR 1910.1
1. Remove filter during cleaning process.
2. Use existing water to deep-cleanse your spa for 1 to 24 hours using approximately 4 oz.
of EcoOne PIPE cleanser.
3. Drain spa and rinse surfaces with fresh water. Clean spa shell and cover. Refill and
drain spa 'well' (center of spa) 2 to 3 times to assure removal of all contaminants from
plumbing.
4. Refill spa and heat to operating temperature. Adjust alkalinity, pH, calcium hardness
as needed. pH Range: 7.2 - 8.2 Alkalinity: 80 - 120 Hardness: 200+
5. Add minimum recommended amount of sanitizer or one dissolving packet of ONEShock™
(where available) per 250 gallons
BIGUANIDE NOTE: When switching from a biguanide product, drain and refill spa before cleansing
and replace cartridge filter.
NEW SPAS: New spas should be filled and cleansed before starting EcoOne® as manufacturer
'wet testing' may cause buildup of mold, or other contaminants.
NOTE: NEVER use household cleaners to clean your spa. They can damage the shell and cause
foaming.
VERY HARD or WELL WATER: Many initial water quality issues can be solved by filling your spa
using the EcoOne® HOSE Pre-Filter. If your water is excessively hard, you may need to use a
stain and scale control product.
SPA monthly Instructions:
1. Fill spa and heat to normal operating temperature.
2. Add sanitizer. Balance alkalinity, then pH if needed.
3. With jets and blowers running, add one bottle of EcoOne® SPA Monthly directly to spa water.
Simple System
Monthly: Add one bottle of EcoOne® SPA monthly
Weekly: Clean filter with EcoOne® FILTER cleanser
Daily: (or as needed) Sanitize with ONEshock or
any sanitizer of your choice.
Maintenance:
AS NEEDED: Maintain lowest recommended sanitizer level (.5 to 3 ppm generally - follow
sanitizer instructions)
WEEKLY: Clean Cartridge Filter with EcoOne FILTER cleanser
WEEKLY (or as needed): Shock spa with ONEShock™, dichlor, or non-chlorine shock.
MONTHLY: Add EcoOne® SPA Monthly
EVERY 3 MONTHS (or as needed): Cleanse spa with EcoOne PIPE cleanser, drain and refill.
DAILY: ENJOYl
Recommended for users with skin and chemical sensitivities.
No ingredients hazardous to humans, animals or plants per CFR 1910.1
